High Efficiency Aquaculture Fish Shrimp Pond Paddle Wheel Aerator 2
Impellers
When the motor is activated, the impellers in the water start to
rotate and make contact with the surface. As a result, air is
pushed into the water, which helps to increase the oxygen levels.
The key to this process is the impellers' ability to create
sufficient water splash and a strong water current. The more splash
that is created, the more air is taken into the water, leading to a
noticeable increase in dissolved oxygen levels.
Another benefit of this process is that the water waves and current
generated by the impellers help to eliminate harmful substances
such as ammonia, nitrite, and hydrogen sulfide from the water. This
results in cleaner, healthier water for aquatic life.
To ensure that our customers receive high-quality products, we use
only brand new materials when producing the components for our
water oxygenators. Our oxygenators are suitable for use in both
freshwater and seawater environments, making them a versatile
solution for improving water quality in a variety of settings.
In terms of efficiency, our oxygenators have an impressive oxygen
transfer rate of 1.9kgs O2/h. This means that they can effectively
oxygenate large volumes of water in a relatively short amount of
time, making them an excellent choice for aquaculture and other
applications where maintaining optimal oxygen levels is crucial.
Features:
1) Actual-bevel gears are used instead of worm gears, thereby
economizing energy with high efficiency, and saving over 20%
electric energy over traditional models
2) The accrual-bevel gear is made of chromium-manganese-titanium
with carbon-nitride surface treatment. This ensures long usage life
spans and high rigidity
3) A mechanical seal is available to prevent oil leakage
4) Inside protectors are available to prevent the motor
accidentally burning out
5) PE floats, nylon impellers, and stainless steel shafts and
frames are available
6) Our paddle wheel aerators are greatly improved and produced
according to the newest international technologies. Adopting whole
plastic floats, these aerators have stainless steel transmission
shafts and frames
7) In April 2000, these products were examined by the China Fishery
Machinery Instruments Equality Supervision Center. All 9 models
were evaluated as reaching the SC/T6017-1999 standard
8) With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than
the standard, power efficiency is 1.71kg (O2)/kWh, 36.8% higher
than the standard
Name | Quantity | Material | Remark |
Brushless motor | 1 pcs | copper wire motor | DC48V 1000W |
L shelf | 2 pcs | 304 Stainless Steel | |
Pipe shaft | 2 pcs | 304 Stainless Steel | 800mm Length |
Paddle Wheel | 4 pcs | Nylon | |
Float | 6 pcs | HDPE | 1750mm Length |
Connector | 2 pcs | Rubber | |
Bearing bracket | 2 pcs | Nylon | |
Power Distribution Box | 1 pcs | circuit breaker
solar controller
DC power supply | |
Battery | 4 pcs | | 45AH*4 |
Solar Panel | 2 pcs | | 250W*2 |
High oxygenation performance :
1 High quality motor expertise design for aquaculture industry
2 Low friction gear reducer with low resistance to decrease energy
losses
3 Sturdy stainless steel Frame ensure without any deformation and
high durability
4 High performance impeller, replaceable paddle,low maintain cost
5 HDPE float resist impact, acid-alkalinity and sun exposure, one
piece blow molded
Working Principle
Powerful features making wave with bottom surface accelerated the
exchange of oxygen-rich water to fully utilize photosynthesis of
algae to consume organic residues, can save feed, but also purify
water, to avoid NH3 and nitrite and other harmful substances. Pond
surface waves more easily dissovled oxygen rate,adjust the upper
and lower temperature, more conducive to water modulation.
FAQ
Q1. Are you a manufacturer or trading company?
A: We are a manufacturer.
Q2. What's your company's main products?
A: Our company is specialized in kinds of aerators for fish pond
and shrimp pond, such as paddlewheel aerator.
Q3. What's the MOQ for your production?
A: NO MOQ.
Q4. What's the lead time?
Usually about 15days-20days, if large quantity, will check the
production line and arrange the schedule.
Q5. What's your payment term?
A: 30% T/T in advance, the rest pay off before delivery.
Q6. Where is your loading port?
A: Ningbo, or else port in China as your requirements.
