Fish Farming Aquaculture Pond Aerator Paddle Wheel Impellers Paddle
Wheel Aerator
Our company has developed a waterwheel type aerator that is based
on the latest international popular models. We have made
significant breakthrough improvements in the transmission mechanism
which makes it stand out from traditional models.
One of the key improvements we have made is the adoption of
arc-shaped bevel gears instead of turbine worm. This change has
resulted in energy savings and high efficiency, with more than 20%
power savings compared to traditional models.
To ensure durability and longevity, we have used
chrome-manganese-titanium alloy steel to make the curved bevel
gear. The surface of the gear is carbonitrided, which gives it high
hardness and a long service life.
We have also taken measures to prevent oil leakage pollution by
adopting a mechanical seal. Additionally, we have installed
protective photos inside the motor to prevent accidental burnout.
The entire machine is made of high-quality materials such as
plastic pontoon, nylon impeller, stainless steel shaft, and
bracket. These materials are carefully selected to ensure that the
machine is durable and can withstand harsh environmental
conditions.
Our waterwheel type aerator is a reliable and efficient machine
that is perfect for use in various water treatment applications.
With our breakthrough improvements, we are confident that our
product will exceed your expectations and provide you with
excellent performance for many years to come.
Name | Quantity | Material | Remark |
Brushless motor | 1 pcs | copper wire motor | DC48V 1000W |
L shelf | 2 pcs | 304 Stainless Steel | |
Pipe shaft | 2 pcs | 304 Stainless Steel | 800mm Length |
Paddle Wheel | 4 pcs | Nylon | |
Float | 6 pcs | HDPE | 1750mm Length |
Connector | 2 pcs | Rubber | |
Bearing bracket | 2 pcs | Nylon | |
Power Distribution Box | 1 pcs | circuit breaker
solar controller
DC power supply | |
Battery | 4 pcs | | 45AH*4 |
Solar Panel | 2 pcs | | 250W*2 |
Features:
1) Actual-bevel gears are used instead of worm gears, thereby
economizing energy with high efficiency, and saving over 20%
electric energy over traditional models
2) The accrual-bevel gear is made of chromium-manganese-titanium
with carbon-nitride surface treatment. This ensures long usage life
spans and high rigidity
3) A mechanical seal is available to prevent oil leakage
4) Inside protectors are available to prevent the motor
accidentally burning out
5) PE floats, nylon impellers, and stainless steel shafts and
frames are available
6) Our paddle wheel aerators are greatly improved and produced
according to the newest international technologies. Adopting whole
plastic floats, these aerators have stainless steel transmission
shafts and frames
7) In April 2000, these products were examined by the China Fishery
Machinery Instruments Equality Supervision Center. All 9 models
were evaluated as reaching the SC/T6017-1999 standard
8) With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than
the standard, power efficiency is 1.71kg (O2)/kWh, 36.8% higher
than the standard
High oxygenation performance :
1 High quality motor expertise design for aquaculture industry
2 Low friction gear reducer with low resistance to decrease energy
losses
3 Sturdy stainless steel Frame ensure without any deformation and
high durability
4 High performance impeller, replaceable paddle,low maintain cost
5 HDPE float resist impact, acid-alkalinity and sun exposure, one
piece blow molded
Working Principle
Powerful features making wave with bottom surface accelerated the
exchange of oxygen-rich water to fully utilize photosynthesis of
algae to consume organic residues, can save feed, but also purify
water, to avoid NH3 and nitrite and other harmful substances. Pond
surface waves more easily dissovled oxygen rate,adjust the upper
and lower temperature, more conducive to water modulation.
FAQ
Q1. Are you a manufacturer or trading company?
A: We are a manufacturer.
Q2. What's your company's main products?
A: Our company is specialized in kinds of aerators for fish pond
and shrimp pond, such as paddlewheel aerator.
Q3. What's the MOQ for your production?
A: NO MOQ.
Q4. What's the lead time?
Usually about 15days-20days, if large quantity, will check the
production line and arrange the schedule.
Q5. What's your payment term?
A: 30% T/T in advance, the rest pay off before delivery.
Q6. Where is your loading port?
A: Ningbo, or else port in China as your requirements.
